Extensions 
(Pipe & Tailpipe)
888-465-7260
Extensions & Miscellaneous Pieces
STRAIGHT
EXTENSIONS
These are used as both tailpipe extensions and headpipe extensions in some of our kits. They can be used in other ways also. One end of each pipe is expanded to slip fit over another pipe. The expansion is 2" deep. Sold individually or as Kits. Each Kit contains 2 extensions and 2 U-Bolt clamps. If you do not want to use clamps to attach. or if you want to clamp, but want to use a cleaner appearing clamp such as the Band type clamp, then order as separate pieces.
|
Straight Extensions |
||
| Description | Part # | Price |
| 2.5" x 22" Long Extension Kit | EXT25022XK | $36 |
| 2.5" x 22" Long Extension w/no clamp | EXT25022X | $17 |
| 2.5" x 14" Long Extension Kit | EXT25014XK | $30 |
| 2.5" x 14" Long Extension w/no clamp | EXT25014X | $14 |
| 2.5" x 8" Long Extension Kit | EXT25008XK | $24 |
| 2.5" x 8" Long Extension w/no clamp | EXT25008X | $11 |
| 3" x 22" Long Extension Kit | EXT30022XK | $38 |
| 3" x 22" Long Extension w/no clamp | EXT30022X | $17 |
| 3" x 14" Long Extension Kit | EXT30014XK | $30 |
| 3" x 14" Long Extension w/no clamp | EXT30014X | $14 |
| 3" x 8" Long Extension Kit | EXT30008XK | $27 |
| 3" x 8" Long Extension w/no clamp | EXT30008X | $11 |
| 3.5" x 18" Long Extension Kit | EXT35018XK | $50 |
| 3.5" x 18" Long Extension w/no clamp | EXT35018 | $24 |
TURNDOWN EXTENSIONS
Tailpipe Extension. Pictured top to bottom: 40 Degree commonly used with the GM A-Body 2-piece tailpipes, 19 Degree commonly used with the Mopars and 10 Degree. Any of these may be used to get the "look" you want.
These are used as Tailpipe extensions and Headpipe 10 degree adapters for the GM G-Body vehicles. They can be used in other ways as needed. One end of each is expanded so as to fit slip fit over another pipe. The expanded area is 3".
Sold individually or as Kits. Each Kit contains 2 extensions and 2 U-bolt clamps. If you do not want to use clamps to attach, or if you want to clamp, but want to use a cleaner appearing clamp such as the Band type clamp, then order as separate pieces.
|
Turn Down Extensions |
|||
| 40 Degrees | 19 Degrees | Price | |
| 2.5" Extension Kit | EXT25015XK | EXT25016XMK | $56 |
| 2.5" Extension ea. w/ no clamp | EXT25015X | EXT25016XM | $27 ea |
| 3" Extension Kit | EXT30015XK | EXT30016XMK | $56 |
| 3" Extension ea. w/ no clamp | EXT30015X | EXT30016XM | $27 ea |
10 Degree Adapter or Turndown
For use as needed. May even be used at the end of collector reducers to direct exhaust flow outward towards side of vehicle when not using exhaust. Don't forget clamps. These are used and included on the GM G-Body Header Systems.
3" (ADP30013); 2.5" (ADP25013) .......................... $27 ea
MUFFLER
OFFSET ADAPTER
This handy item allows one to use the Walker 3" Ultra Flo's or Race Magnum Bullet mufflers with our systems. Just install it between the front of any of these or similar mufflers and the end of the Headpipe. Can be used in other ways also. Available in 2.5" only.
2.5" (MFO25) ................................... $33 ea
MUFFLER TURNDOWNS
Mandrel Bent, aluminized turndowns for use at end of mufflers when not using tailpipes. (Using headpipe kit only)
3" (MFTD30) ............... $25 ea 3.5" (MFT35) ............... $25 ea
These two pieces make up the GM Split Headpipe. They can be used in other ways as needed. Sold separately.
| 2.5" | GMXSP2500F | Short Piece | $41 |
| 3" | GMXSP3000F | Short Piece | $44 |
| 2.5" | GMXSP2500B | Long Piece | $44 |
| 3" | GMXSP3000B | Long Piece | $47 |
| 2.5" | GMXSP2500 | Set (Long & Short Piece) | $85 |
| 3" | GMXP3000 | Set (Long & Short Piece) | $91 |
(Please give vehicle, engine and year & any other pertinent info so we can answer your question and send the correct information)
"All performance
exhaust products for pollution controlled vehicles are intended for off-road or
drag strip use only"
Copyright © 2002-2010, Torque Tech & Co., Inc. All rights reserved.
This page last
updated:
06/12/2010