Perform
a
nce Catalytic Converters
HI-Flow
Converters
These converters flow so efficiently that you can enjoy better performance and do your share for cleaner air, also. Large body design for up to 460 cu.in. engines per converter. 26% more frontal area for increased performance. Available in both 2.5" and 3" diameters. Stainless steel inside and out for longer life.
Use Three-Way type if you have an Air Pump mounted on the engine with an air supply line going to the catalytic converter. If you have one line going down, then use either CATWAY30-1 or CATWAY25-1. The CATWAY25 and CATWAY30 each has two tubes for two lines. The CATOX25 and CATOX30 do not have air tube provisions. They are for use where no air pump is involved.
| Part # | Figure # | Shell Length | Inlet/Out | Catalyst Type | Qualified Engine Displacement per side | Price |
| CATOX2518 | 1 | 13" | 2.5"/2.5" | Oxidation | 455 (7.5L) | $99 |
| CATWAY2514 | * * | 9" | 2.5"/2.5" | Oxidation | 360 (5.9L) | $ 79 |
| CATWAY2514-1 | * * * | 9" | 2.5"/2.5" | Three-Way | 360 (5.9L) | $ 79 |
| CATWAY2520 | 2 | 15" | 2.5"/2.5" | Three-Way | 460 (7.5L) | $119 |
| CATWAY2518-1 | * | 13" | 2.5"/2.5" | Three-Way | 460 (7.5L) | $ 99 |
| CATOX3018 | 1 | 13" | 3"/3" | Oxidation | 455 (7.5L) | $149 |
| CATWAY3020 | 2 | 15" | 3"/3" | 3-Way + Oxid | 460 (7.5L) | $119 |
| CATWAY3018-1 | * | 13" | 3"/3" | 3-Way + Oxid | 460 (7.5L) | $149 |
| * Same as Figure 1 except with one air tube | ||||||
| Three-Way Converters can be used w/o Air Pump,,,,,,,, just pinch off or close the Air Tube. | ||||||
Click
here for explanation of different types of converters.
Make Your Own -- Trim the supplied pipe to desired length, weld onto end(s) flange of your choice and ta, da! You have a test pipe to insert in the place of your Catalytic Converter. This way you can substitute the Test Pipe at the track when racing. This is for track or off road use only!
| Part # | Tubing Included | Flanges, etc. Included | Price |
| TP30122 | (1) 3" x 22" Alum. Pipe | (1) 4-Bolt Flange w/ 3" x 4' Oval Opening | $ 32 |
| TP30123 | (1) 3" x 22" Alum. Pipe | (1) 4-Bolt Flange w/3" Oval Opening and (1) 3" 3-Bolt Collector Flange w/Collector Gasket & Nuts, etc. | $ 40 |
| TP30322 | (1) 3" x 22" Alum. Pipe | (2) 4-Bolt Flanges w/ 3" x 4" Oval Opening | $ 48 |
| TP30422 | (1) 3" x 22" Alum. Pipe | (2) 3" 3-Bolt Collector Flanges w/Gaskets & Nuts, etc | $ 33 |
| TP30522 | (1) 3" x 22" Alum. Pipe | (4) 3" 3-Bolt Collector Flanges w/Gaskets & Nuts, etc. | $ 45 |
| TP25022 | (1) 2.5" x 22" Alum. Pipe | (1) 4-Bolt Flange w/ 2.5" Round Hole | $ 32 |
| TP25023 | (1) 2.5" x 22" Alum. Pipe | (1) 4-Bolt Flange w/2.5" Round Opening and (1) 2.5" 3-Bolt Collector Flange w/Collector Gasket & Nuts, etc. |
$ 40 |
| TP25222 | (1) 2.5" x 22" Alum. Pipe | (2) 4-Bolt Flanges w/ 2.5" Round Hole | $ 48 |
| TP25422 | (1) 2.5" x 22" Alum. Pipe | (2) 2.5" 3-Bolt Collector Flanges w/Gaskets & Nuts, etc | $ 33 |
| TP25522 | (1) 2.5" x 22" Alum. Pipe | (4) 2.5" 3-Bolt Collector Flanges w/Gaskets & Nuts, etc. | $ 33 |
CATALYTIC
CONVERTER MOUNTING FLANGES
The following are standard 4-Bolt Flanges. Gaskets are not needed.
| Flange | Part # | Price |
| 2.5" Round Opening | FLA4B25 | $ 23.50 ea |
| 4" x 3" Oval Opening | FLA4B30A |
COLLECTOR FLANGES
| Flange | Part # | Price |
| 2.5" | FLACF25 | $ 8.00 ea |
| 3" | FLACF30 | |
| 3.5" | FLACF35 |
(Please give vehicle, engine and year & any other pertinent info so we can answer your question and send the correct information)
"All performance
exhaust products for pollution controlled vehicles are intended for off-road or
drag strip use only"
Copyright © 2002-2010, Torque Tech & Co., Inc. All rights reserved.
This page was last edited:
06/12/2010